| |

DIY Advent Calendar: Sew a Christmas Tree with 25 Pockets

Lucy here! This year I decided to sew a DIY advent calendar, and I am so happy with how it turned out. It is a big fabric Christmas tree with 25 little pockets, one for every day leading up to Christmas, and I made the whole thing out of thrifted bed sheets and pillowcases.

This post contains affiliate links, which means we may earn a small commission when you shop through them, at no extra cost to you. Thanks for supporting The Threads Between.

I am not a professional sewer, and I made a pretty big mistake along the way (I will tell you exactly what it was so you can skip it). If you can cut a square and sew a mostly straight line, you can make this. Welcome to the fastest advent calendar tutorial ever!

DIY advent calendar sewn as a fabric Christmas tree with 25 pockets

Want to see it come together? You can watch the full reel on Instagram.

What You’ll Need for a DIY Advent Calendar

I thrifted all of my fabric. Bed sheets and pillowcases are perfect for this because you get a lot of fabric for just a few dollars.

How to Sew a Christmas Tree Advent Calendar

Step 1: Prep your fabric

Wash and iron your thrifted fabric. If you are using a fitted sheet, cut off the elastic scrunch so the fabric can lay flat.

Step 2: Cut out your tree

There are a lot of patterns out there you can use for a Christmas advent calendar, but I just made my own. I knew I wanted 25 pockets and that each pocket would start as a 4 inch square, so I did the math and drew a tree big enough to hold them all. If you want a starting point, a tree about 32 inches tall and 26 inches wide at the bottom fits all 25 pockets in rows of 1, 2, 3, 4, 4, 5, and 6.

  1. Draw half of a tree shape on your front fabric and cut it out.
  2. Fold it in half down the middle and trim so both sides match.
  3. Use that tree as your pattern to cut one tree from the batting and one from your backing fabric.

Step 3: Sew the front of the tree to the batting

This is where I messed up, so do not do what I did! Lay your front fabric on top of the batting with the right side (the pretty side) facing out, then sew around the edge to hold the two layers together. I did it the other way and ended up very frustrated.

Step 4: Cut your pocket squares

Each pocket is made from two squares, so for 25 pockets you need 50 squares. Cut them 4 inches by 4 inches. My way of doing this is super janky. I cut one square, laid it on the fabric as a guide, and worked my way down with the rotary cutter. Cut however works for you. No one is going to judge, you are just doing your best!

Step 5: Sew the pockets

  1. Take two squares of the same color and sew them together around the edges with about a half inch seam allowance.
  2. Leave a small gap at the bottom so you can flip it.
  3. Trim the corners and edges close to the seam so the pocket is not bulky.
  4. Flip the pocket right side out and use a chopstick to push out the corners.
  5. Repeat until you have 25 pockets.

This part takes a while, so put on a Christmas movie and recruit help. I signed my husband up for flipping duty!

Step 6: Pin and sew the pockets to the tree

Lay all 25 pockets out on the front of your tree and move them around until you like the pattern, then pin them down. Sew each pocket along the sides and the bottom only. Leave the top open, because that is your pocket! Make sure the gap you left is at the bottom so this seam sews it shut.

Step 7: Add the backing

  1. Lay the backing fabric on top of the tree with the right sides together and pin all the way around.
  2. Sew around the edge, leaving a gap at the bottom of the tree.
  3. Flip the whole tree right side out through the gap.
  4. Hand sew the gap closed, and you are done!
Finished DIY advent calendar tree with red, white, and gold pockets laid flat

Why We Love This DIY Advent Calendar

It is the kind of Christmas decoration you pull out year after year. Since it is made from thrifted sheets it cost almost nothing, and the pockets are big enough for a piece of candy, a little note, or a slip of paper with a family activity for the day. We’re going to put polaroids in ours to remember everything we did this Christmas season!

Tips for Sewing Your Advent Calendar

  • Lay your finished pockets on the tree before you sew anything down to make sure all 25 fit.
  • Keep the right side of your front fabric facing out when you sew it to the batting. Learn from my mistake!
  • Trimming the corners before flipping makes the pockets much crisper.
  • Do not stress about perfect squares. Once they are sewn on the tree, nobody can tell.
  • Mix up your pocket colors as you lay them out so the same color is not side by side.

If you make your own DIY advent calendar, I would love to see it! What would you put in the pockets? Tell us in the comments.

Looking for a Christmas craft to do with the kids? Try our torn paper Santa craft next.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *